During the cleaning process, Z is prone to anomalies. At this point, maintenance of the industrial sewing machine is necessary. Of course, there is no need to make the surface of the needle rod and upper bending needle shaft completely free of oil. Just remove the dust and gently wipe it off. For parts with complex shapes, using a used toothbrush and Hedek filter element can easily remove dust. Also, some sharp parts on the sewing machine should be carefully cleaned to avoid injury.
The maintenance of industrial sewing machines must pay attention to the following points:
(1) Clean the feeding teeth by removing the screws between the needle plate and the feeding teeth, removing cloth fuzz and dust, and adding a small amount of sewing oil.
(2) The cleaning of the shuttle bed is the core of the sewing machine's work, and it is also a place where Z is prone to malfunctions. Therefore, it is necessary to regularly remove dirt and add a small amount of sewing oil.
(3) Cleaning of other parts: The surface of the sewing machine and all parts inside the panel should be regularly cleaned. Other maintenance
(1) After completing the work, insert the machine needle into the needle hole plate, lift the presser foot, and cover the machine head with a machine cover to prevent dust and debris from entering.
(2) When starting work, first check the main components, check the weight of the steps, whether there are any special sounds, whether the needles are normal, etc. If any abnormal phenomena are found, they should be repaired in a timely manner.
(3) After a considerable period of use, the machine needs to undergo a major overhaul. If any parts with significant wear and tear are found, they should be replaced with new ones
